Pile Cage Welder

Controlled by only one person.
Output: max. 4m per minute, but only ever run it at 2m per minute.
8 Rebar pay-off stations, with straighteners

The 5mm welded helical can be programmed to vary the leg frequency to provide closer centres at the pile ends and then transitioning to wider centres in the middle. There is a cutting station that moves automatically at the same speed as the cage and an automatic off load station that handles cages up to 15m long.

EVG Polybend for SALE

A used EVG Stirrup bender, type POLYBEND PBN-16-C,  used for bending stirrups from coil or produce straight bars from coil.
Wire on coils can be used from 6mm up to 16mm.
Catalog of stirrup bending shapes stored in computer.
– 2 wire pay-offs
– Barcode Scanner
– 4 bending mandrels

MEP PREFORM C+P

Year 2005
Excellent condition, refurbished and revised
Dimensions: 15,000 x 4,000 mm
Reinforcing cage dimension: Minimum 150 x 150 mm, maximum 1000 x 1000 x 8000 mmm
Stirrups diameter: 4-16 mm
Longitudinal wire: 4 to 6 mm
Minimum/Maximum pitch: 50-500 mm
Peak power absorbed: 35 kVA
Normal consumption: 5,5 kVA
Includes: 3 wire pay-offs

Straightening and cutting machine

Type: RA100/5
Automatic diameter adjustment
All diameters available at any time

– Control B&R
– 5 pcs. wire pay-offs, diameter 6-14mm
– hydraulic unit
– outfeed track: 10m length
– Double bending device for cranking up the ends

EVG Stirrup Bender

Stirrup bender to produce stirrups and bars.

Year: 2007

Automatic setting of wire guides and straighteners.
Condition: very good, machine cleaned and all straightening and driving rollers changed to new ones!

Wire diameter ranges for single wire: 6,0 – 16,0 mm
Wire diameter ranges for double wire: 6,0 – 12,0 mm

RA-XE 16/6 Straightening and Bending

FOR SALE
Rotor straightening and cutting machine EVG-FILZMOSER RA-XE 16/6 with double bending
Year of construction 1999, with 2 movable bending heads at the outfeed table
6 wire tracks for wire diameter: 6-16mm
Production direction from left to right
In very good condition, regularly serviced by EVG-FILZMOSER

TOP ADVANCED TECHNOLOGY

for the production of mesh sheets and reinforcing panels. Top condition
Fully automatic, Year of manufacture: 2010
No changeover time needed for production of different sheet shapes
Including automatic bending stations for cross and line wire overhangs
Diameter of longitudinal bars of a mesh from coil (or rod): 6-16 mm (18-20 mm)
Diameter of transverse rods from coils: 6-16 mm
Length of the longitudinal bars of the mesh: 300-12000 mm
Length of transverse rods: 300-4000 mm
The largest element 4000 x 12000 mm
The smallest element 500 x 800 mm
The maximum weight of welded panels (meshes) is 700 kg
The maximum weight of a unit surface of welded elements is 30 kg/m2

Stirrup Bending Machine Model PROGRESS EBAs 14/16

appropriate for wire diameters 6mm up to 14/16mm
Double-Wire-Production from 6mm to 10mm
5 pieces wire pay-offs, with brakes and coil holders
Diameter change is semi-automatic with feeding rollers
Wire coils max. 3.5tons
Fully electric driven

Complete Line, including stacker – FOR SALE

Year 1992
Girder height : 70 to 300 mm (steplessly)
Girder width : 65 to 85 mm
Top wire : 5 to 12 mm
Stirrups : 4 to 6 mm
Bottom wires : 5 to 12 mm
Girder length : 1 to 12 m

Power supply : 400 V / 50 Hz / 3 cycles / 150 KVA

Rebar Cutting like NEW:
Year: 2015
Condition: like a new machine, was only used in test run.
The FLEXIPLUS is an automatic system for cutting to length of bar material. The machine is very flexible and allows the cutting of bars to length, the automatic collection of the positions in different compartments and bending of the bars at both ends.
Specification:
– bar thickness from 8mm to 40mm (#2 – #8)
– number of rods cut at once: 1 – 9 pieces, depending on diameter
– minimum/ Maximum cutting length: 800mm up to 12m

Stirrup Bender MEP FORMAT S

Fully refurbished
Year: 2000
Dismantled and ready for loading
2 pcs Wire Pay-Offs with brake,
2 pcs coil holder
All accessories
Double wire: 8-12mm

Hyperbolic Rotor-Straightener – FOR SALE

Very smooth surface of the straightened wire bars
Use of wire coils, diameters 6 to 14mm
6 unwinding reels 6-14mm, alternatively 2×10 oder 12mm.
Production of straightened bars and
2 Bending units
Bar distribution conveyor
Chain conveyor with 100mm sections
Can be inspected during operation.