Facade elements production

ACOTEC Production Line ELEMATIC PREQAST-M24515

William
For Sale is a  ACOTEC Production Line
Manufacturer: ELEMATIC
Output: 160 m2/h
Year: 2019
This offer comprises 2 ELEMATIC production lines and also includes a FRUMECAR batching plant.
Acotec panels are precast, non-load bearing partition walls. They are room-high (max. 3.20m) and 600-mm wide, with a tongue and groove design along the vertical edge.
The panels are 6 times faster to install than traditional brickwork and twice as fast as blockwork.
ACOTEC Video Links
Acotec Partition Wall Installation
https://www.youtube.com/watch?v=QtIMyD68LlE
Acotec Elematic Production Line
https://www.youtube.com/watch?v=iR7xVL6N3ZI
ACOTEC Produktionslinie ELEMATIC M24515

ACOTEC Production Line ELEMATIC M24515

Request for more Information: please use this form Continue reading →

Folding Tables 2 sets, PREQAST-M23509

William

Folding Tables for Twin-Wall production

2 sets used Folding Tables for Twin-Wall production (consists 4 tables)
Brand: SOMMER
Year 2007, less used
Casting area: 7210 x 3140mm
Max. Load: 11tons
Double-Wall Thickness: 180-400mm
Steel sheet 8mm, even face
Used for face concrete
Including:
E-Vibration
Converter
Control
Heating Pipes
Wax protection applied to mould surfaces

VIDEO LINK on Youtube:
https://youtu.be/HmyNXPCOEyE

KLAPPPALETTEN

FOLDING TABLES

Request for more Information: please use this form Continue reading →

Twin Wall and Floor Slab Pallets Carousel M23496

William

Twin-wall and floor slab production SKAKO
incl. turn-over crane for twin wall

Manufacturer: SKAKO
Year of manufacture: 1994
Control : Siemens
Daily output: approx. 600 sqm/day (single wall)

PALLETS CIRCULATION
pallets: Dimension: 3 x 9m, 54 pieces
Pallets are transported from station to station via roller blocks, drive via friction wheel,
Condition of the pallets: GOOD
Transport rollers: 876 pieces
Gear motors: 50

STRIPPING AND LIFTING
Hydraulic tilting table
Lifting device

CLEANING, FORMWORK AND OILING
Table cleaning station: Manual cleaning
Shuttering: manual
Draw outlines manually

4 transverse palett carriers

CONCRETE SPREADER AND VIBRATING STATION
Concrete spreader: with hydraulics, control box and control system
Vibratory station: hydraulic unit

TURN-OVER CRANE
enables the marriage between lower shell (wet) and upper shell (hardened),
then results in a double wall.

HARDENING CHAMBER
11 levels, 5 stacks
RBG (storage and retrieval machine)

CABINETS WITH CONTROL
10 cabinets,
Siemens control system

DW Palettenumlauf P

DW Carousel P

Request for more Information: please use this form Continue reading →

Laser projection for precast concrete plant M22432

William

Mecoon Laser-projection-system

consists of 6 Laser Projectors

The system is able to display contours of different components, recesses and lattice girder separately.

Accuracy by independent Calibration of the laser projector. Fully automatic and quickly the laser projector is set up and ensures accurate projection results.

Mecoon Laserprojektion

Mecoon Laser-projection-system

Request for more Information: please use this form Continue reading →

Precast Mobile Access Aid NUSPL M21400

William

Mobile Access Aid

for a precast tilting and lifting station.
The electrically movable access aid (ladder) runs along a rail fixed to the floor.
This allows quick access to the upper end of the elements and safe work at height.
E.g. attaching to the crane, and no longer need to carry ladders for a walk.
The speed of the longitudinal movement is infinitely variable.
Installation usually along a tilt table.

Mobile Aufstiegshilfe

Mobile access aid NUSPL

Request for more Information: please use this form Continue reading →

How much for my Precast Plant ?

William

How much can I get for my precast production plant or equipment?

To find out the worth of your production machine/plant send some basic information like:

  • Brand/Type of the machine/ equipment/ plant
  • Year/ Capacity
  • Condition and add. info i.e. photos

Send us an e-mail to or use the Request Form below:

Wieviel bekomme ich für meine gebrauchte Maschine?

How much can I get for my used machine ?

Request for more Information: please use this form Continue reading →

Sandwich Wall Production with 4 pallets M24521 ** SOLD **

William
Mini pallet circulation system with 4 pallets
Sandwich Wall Production, to produce solid walls, sandwich walls, floor slabs or balconies, etc.Included:
– 4 steel pallets dimension 3.50m x 12.50m, load capacity >750kg/m2
– Vibrating station
– Hydraulic tilting station, for lifting the wallsCondition of the pallets: good
Complete and in use until the end of May 2024

Wandproduktion mit 4 Paletten

Sandwich Wall Production with 4 Pallets

Request for more Information: please use this form Continue reading →

Precast Tables 4.60m x 6.50m 6No. M23469 ** SOLD **

William

Precast Tables 4.60m x 6.50m

Set of 6 pieces fixed casting tables with vibrators for precast elements
Flat steel sheet and heating pipes
5 vibrators per table

consists of:

3 pieces precast casting table
Shuttering plate dimensions 4.60 x 6.50m
weight approx. 5to

1 piece precast casting table
Shuttering plate dimension 4.60 x 7.00m
Weight approx. 5to

1 piece precast casting table
Shuttering plate dimension 3.80 x 5.00m
Weight approx. 4to

1 piece precast casting table
Shuttering plate dimension 3.80 x 6.34m
Weight approx. 4to

Fixe Tische

Casting Tables

Request for more Information: please use this form Continue reading →

Pallets Carousel for Double Wall (Twin Wall) Production, PREQAST-M24514 *** SOLD ***

William
Manufacturer: Vollert, Nuspl, Weckenmann, EBAWE, Filzmoser, RATEC, Unitechnik, SAA
Year of construction: 2020, 2019, 2017, 2003, 1991
Control system : Siemens S7, UnitechnikPALLET CAROUSEL FOR DOUBLE WALLS
Pallets: 10.60m x 3.08m, 48 piecesSTRIPPING AND LIFTING
Hydraulic tilting station (EBAWE company, renewed in 2017)
Lifting device for shell 1 + floor element (Weckenmann)CLEANING, PLOTTING, ROBOT-SHUTTERING AND OILING
Automatic pallet cleaner, plotter, shuttering robot (Weckenmann, renewed in 2020 and 2003)

STEEL REINFORCEMENT, ROBOT, WIRES, FILIGREE GIRDERS
Automatic longitudinal and cross wire machine, diameter 6-14 mm, lattice girder preparation,
Automatic insertion robot for laying all bars, as well as the lattice girders (Filzmoser)

CONCRETE DISTRIBUTION, VIBRATION
Automatic concrete spreader 3m³, 9 ejection augers + 9 flaps, (Weckenmann/SAA company 2003,
control replaced 2019), electric vibrating station (Vollert)

CURING CHAMBER + AUTOMATIC PALLET STACKER CRANE (RBG)
47 pallet spaces divided, 47 insulated automatic segment doors (Vollert, extension 2003)
RBG (storage and retrieval machine, Vollert 1991)

Doppelwand und Elementdecken Palettenumlauf

for Double Wall (Twin Wall) and Filigree Floor Production, MFA M24514

Request for more Information: please use this form Continue reading →

Pallets Carousel Walls, Twin Walls, Filigran Floors SKAKO M23489 *** SOLD ***

William

Pallets Carousel – FOR SALE

Filigran Floor and Twin-Wall Carousel
Manufacturer : SKAKO
Control system : OSD Schenk
Master computer: SAA
Daily output: approx. 750 – 800 sqm/day

PALLETS
80 steel pallets (moulds): Dimension: 3 x 9m and  2.5 x 14m,
Pallets are transported from station to station by roller blocks, driven by friction wheel,
Condition of the pallets: “Very good”
Complete Plant

 

DW Umlauf

Carousel

Request for more Information: please use this form Continue reading →

Concrete Slab Tilting Table M22463 *** SOLD ***

William
Concrete Slab Tilting Table
Hydraulic tilting table, manufacturer: fibo intercon (vorher Optiroc) Dänemark
Dimension: 3,30m x 15,00m, height 61cm
outer dimension for transport width: 3,37m
includes heating coils for hot water
Planner steel decking
Year: 2000
4 hydraulic cylinders, 4-stage version
Load: max. 750kg/m2
Table weight: 12 toLocation in the hall, but surface exposed to rust.
For face concrete, the surface should be polished.
Without hydraulic unit.  Price: EUR 19,900.00
2 tables are available.
Kipptisch PREQAST

TILTING TABLE 3.3M X 15M

Request for more Information: please use this form Continue reading →

Battery Mold II 9 Compartments 8 x 3m M23493 *** SOLD ***

William
Battery Mold 9C
– 9 compartments
– Compartment dimensions: 8.00m x 3.00m
– suitable for wall thicknesses: 12cm, 18cm, 20cm
– incl. steaming
– incl. remote control for the chain-driven flap system for opening and closing
– the flap is folded down depending on the direction of travel and pressed by hydraulics
– lateral adjustment is roughly adjusted with an arm system made of metal tubes and is then
adjusted to the desired size with a thread
9-Fächer Batterie

Battery 9 compartments

Request for more Information: please use this form Continue reading →

Battery Mold 20 Compartments, 6380 x 2610mm M22467 *** SOLD ***

William
Battery Mold WEILER
Equipment condition: used
20 Compartments
Sheet size: 6380*2610
Type of heating (steam/water): steam
Frequency of vibrators: 3000 rpm
Electrical/hydraulic performance: working
Year of manufacture: 2011
Time of operation: constantly
Was in operation: 2011-2018
Applicable Products: wall panels, landings, precast slab, precast floor, precast wall.
Thickness of panels between 160 and 200 mm
Battery Mold

Battery Mold

Request for more Information: please use this form Continue reading →

Wall-Elements Plant for lightweight concrete panels A14053 *** SOLD ***

William

010Lightweight concrete panels production plant – FOR SALE

For panels, slabs, walls made in LIAPOR, LECA or other light materials to encase or insulate warehouses, distribution centres and industrial buildings with steel frame construction.
Further the equipment can be adapted for the production of standard concrete walls and floors as well.

Pallets Carousel Line, Pallets dimension/max. element size: 2.00 x 12.00 m

Complete Concrete Mixing plant with cement silos, aggregates silos, conveyor belts, bucket elevator etc. is included.

Precast concrete panels are delivered to site made to measure. Manufactured in controlled environment factory conditions, the panels are quickly erected to provide high quality precast concrete walls.

Wall-Elements Plant

Wall-Elements Plant

Request for more Information: please use this form Continue reading →

Magnets and shuttering system RATEC M21419 ** SOLD **

William

Magnets and shuttering system:

1.500 pieces Standard Magnets , 1.200 pieces profiles in different lengths  with height 70mm

Preferably use for the production of filigree slabs and twin walls.

Profile list, height 70mm:
250mm length: 165 pieces,
400mm length: 10 pieces x
500mm length: 169 pieces
750mm length: 15 pieces
1000mm length: 220 pieces
2000mm length: 261 pieces
3000mm length: 333 pieces
and 50 pieces x 500mm (residual shuttering)

Includes:
– Magnet and profiles cleaner
– Magnets conveyor belts, profiles conveyor belts
– Steel construction

Magnete und Schalungen

Magnets and shuttering

Request for more Information: please use this form Continue reading →

Concrete Twin Wall Production Carousel A20397 ** SOLD **

William

WECKENMANN, VOLLERT

A complete pallets circulation plant for the production of Twin-Walls, Floor slabs with lattice girders or Solid walls.

WATCH VIDEO

Includes 56 moveable pallets (moulds), size 12500 mm x 3500 mm
Made by WECKENMANN and VOLLERT, consists of:
– Mixing plant from HARRUP, year of construction 2007, mixer 1,5m3, row batcher
– Automatic concrete spreader
– Cleaning and separating oil station
– Fully automatic shuttering robot with shuttering magazine
– Shuttering and magnets 75, 150, 250mm
– Vibration station
– Curing chamber, automatic storage of 69 pallets
– Turn-over crane VOLLERT
– Automatic reinforcement system with EVG/FILZMOSER RA-XE 16/6 straightening machine, lattice girder preparation and automatic reinforcement robot for laying bars and lattice girders

DW Palettenumlauf

Twin Wall CAROUSEL

Request for more Information: please use this form Continue reading →

Double-Wall Carousel A20355 – 500m2 per day *** SOLD ***

William

Double-Wall Carousel A20355 – 500m2 per day

Purpose of Use:

Production of Double Walls with Lattice girders (Truss girders), thickness up to 50cm,
can be used for solid slabs until thickness of 20cm

Advantage: low transport weight, second stage concreting will be done finally on site !

Output: Typical 450-500 m2 per shift

Moving Casting Pallets:

Dimension: Width 3.00m by Length 8.30m, 44 pieces

Pallets are guided in the production process via rails and drive rollers.

Double-Wall Carousel A20355

Double-Wall Carousel A20355

Request for more Information: please use this form Continue reading →

Concrete Twin-Wall and Floor Production Carousel A21399 ** SOLD **

William

Twin-Wall Carousel

Pallet circulation system for the production of double walls and Filigran-Floors
from 2007

WATCH VIDEO

Scope of delivery:
32 pallets length 7.9 m, width 3.0 m
Shuttering profiles with automatic clamping system
1 Vario and vibratory compaction system
1 concrete spreader 2 m3
1 multi-function crane, lifting capacity 250 kN
2 stacking racks complete with roller wheels
1 cleaning plotter
1 tilting device at demoulding station
1 turning traverse for turning in the double wall
Control cabinets and control system

Doppelwand Produktionsanlage

Twin-Wall production carousel

Request for more Information: please use this form Continue reading →

Tilting Table AVERMANN 15m X 4m A20386 ** SOLD **

William

Tilting Table FOR SALE

Year of construction = 2010, Manufacturer: Avermann Maschinenfabrik GmbH, Germany, total weight = 15.2 To

Consists of:
– 1 Hydraulic large surface table 15.0m x 4.0m (7.5 kN/m2, payload max. 40 To)
– 1 thermal oil heating register for tilting table
– 10 spanning beams
– 13 Brackets for vibrators

Kipptisch A20386

Tilting Table 15x4m A20386

Request for more Information: please use this form Continue reading →

Small Double-Wall Carousel A20353 -150m2 per day ** SOLD **

William

Double-Wall Pallets Carousel EBAWE, Palette 6,5x3m

Carousel with pallets for the precast production of Double-Walls and Filigree Floors with Lattice Girders. Also appropriate to produce solid or sandwich walls or other precast products.

Possible Output up to 150m2 Double-Wall or 300m2 single floor elements.

Size of the circulating pallets 6.50m by 3.00m.

Small Double-Wall Carousel A20353

Small Double-Wall Carousel A20353

Request for more Information: please use this form Continue reading →

Twin-Wall Carousel Production A20351 ** SOLD **

William

Twin-Wall Carousel Production WECKENMANN, VOLLERT – FOR SALE

for the production of Twin Walls, Filigree Floor Slabs, Solid Walls, Light Concrete Walls, Solid Floor Slabs, Sandwich Walls
Size of pallets: 3.80m x 10.80m
This carousel production is still in operation and consists of all equipment for a twin wall production, as this is: 34 pallets, turnover crane, curing chamber and pallets handling crane, cleaning, oiling and plotter, tilting table for finished twin walls, cart for the transport of wall to outside stock etc.
Condition: Very good, usual signs of wear

 

Twin-Wall Carousel Production A20351

Twin-Wall Carousel Production A20351

Request for more Information: please use this form Continue reading →

EBAWE precast concrete form plotter A14054 ** SOLD **

William

Universal plotter – FOR SALE

Year: 2013
Condition: almost new, very good
Steuerung: PC und Steuerschrank
Moving area: max: 12975mm x 3813mm

The plotter marks slabs cutting lines, rectangles and circles for openings and recesses, texts for identification on cast slab surface or places for dividers and fittings on empty bed surface.

plotter

EBAWE plotter

Request for more Information: please use this form Continue reading →

Battery Mold ELEMATIC 3.03 X 8.0M, 7 Compartments, A9347 **SOLD**

Franz Filzmoser

Battery Mould – FOR SALE

In mint condition / not used, only 1 test process
Year of construction: 2010

Technical specifications:
7 pouring compartments, size: 3.03m x 8.0 m
1 fixed outer wall, thickness 780mm
6 movable partitions on rails, thickness 220mm
1 movable outer wall, thickness 780mm on rails
Incl. Work platform, stairs and railings
including external vibrators and
1 frequency converter and controller
1 hydraulic unit to close the battery mold
1 built-in heating register in outer and movable partitions

 

Battery Mould ELEMATIC

Battery Mould ELEMATIC

Request for more Information: please use this form Continue reading →

Plotter AVERMANN A8242 **SOLD**

Mehmet

Plotter AVERMANN – FOR SALE

Year: 2012
Condition: almost new, very good
CONTROL: IPC and E-cabinett
Moving area: max: 8500mm x 3600mm
Clear height: 2868mm

The plotter marks slabs cutting lines, rectangles and circles for openings and recesses, texts for identification on cast slab surface or places for dividers and fittings on empty bed surface.

Plotter AVERMANN

Plotter AVERMANN

Request for more Information: please use this form Continue reading →