Length: 13.40 x 4,08 m
Casting area: length 13.22 x 4.03 m
Steel sheet
10 pcs external vibrators
Side form left/right height 0.18 m
Side form at turning edge height 0,195 m
No heating pipes
Hydraulic unit for 2 tables
Tilting table 13.40 x 4.08m
Fully refurbished
Year: 2000
Dismantled and ready for loading
2 pcs Wire Pay-Offs with brake,
2 pcs coil holder
All accessories
Double wire: 8-12mm
Stirrup Bender MEP FORMAT S A9350
Carousel with pallets for the precast production of Double-Walls and Filigree Floors with Lattice Girders. Also appropriate to produce solid or sandwich walls or other precast products.
Possible Output up to 150m2 Double-Wall or 300m2 single floor elements.
Size of the circulating pallets 6.50m by 3.00m.
Small Double-Wall Carousel A20353
for the production of Twin Walls, Filigree Floor Slabs, Solid Walls, Light Concrete Walls, Solid Floor Slabs, Sandwich Walls
Size of pallets: 3.80m x 10.80m
This carousel production is still in operation and consists of all equipment for a twin wall production, as this is: 34 pallets, turnover crane, curing chamber and pallets handling crane, cleaning, oiling and plotter, tilting table for finished twin walls, cart for the transport of wall to outside stock etc.
Condition: Very good, usual signs of wear
Twin-Wall Carousel Production A20351
Year: 2013
Condition: almost new, very good
Steuerung: PC und Steuerschrank
Moving area: max: 12975mm x 3813mm
The plotter marks slabs cutting lines, rectangles and circles for openings and recesses, texts for identification on cast slab surface or places for dividers and fittings on empty bed surface.
EBAWE plotter
Straightening and Bending Machine EVG-FILZMOSER RA-XE
-Hyperbolic rotors, Year 2002
-Included 2 bending heads moveable attached to the run-off table
-Wire diameters: 2x6mm, 8, 10, 12, und 14mm
-Automatic Spacer Feeding, 2 Vibration pots
–Condition: Very good, well maintained
EVG FIL RA-XE 166
Mould No.1
Year 1994. Max. Dimension 80 x 100cm, Length 24m (3 parts 1x12m, 2x6m)
Height 1.60m, Width over all 2.40m, 1-sided stroke, Shipping length 1x12m, 2x6m
Included: 12 vibrators
Mould No.2
Year 1995. Max. Dimension 80 x 80cm, Length 20m (3 parts 1x8m, 2x6m)
Height 1.51m, Width over all 2.40m, 1-sided stroke, Shipping length 1x8m, 2x6m
Included: 10 vibrators
Mould No.3
Year 1995. Max. Dimension 80 x 120cm, Length 20m (3 parts 1x8m, 2x6m)
Height 2.20m, Width over all 2.40m, 1-sided stroke, Shipping length 1x8m, 2x6m
Included: 10 vibrators
Column-Beam-Moulds
In mint condition / not used, only 1 test process
Year of construction: 2010
Technical specifications:
7 pouring compartments, size: 3.03m x 8.0 m
1 fixed outer wall, thickness 780mm
6 movable partitions on rails, thickness 220mm
1 movable outer wall, thickness 780mm on rails
Incl. Work platform, stairs and railings
including external vibrators and
1 frequency converter and controller
1 hydraulic unit to close the battery mold
1 built-in heating register in outer and movable partitions
Battery Mould ELEMATIC
Model: Twinmaster 12S
Condition: Revised. Fully Operational
Extras: Two Pay-Offs and Two Coil Holders
Other: Bar Code Scanner. A third pay-off can be delivered
Technical specifications:
Wire diameter Single strand: Ø 5-12,7 mm and double strand: Ø 5-10 mm
Rate of feed, max. 110 m/min
Bending speed, max. 1500°/sec
Operating voltage 3 x 400/ V/50 Hz
Stirrup Bender Stema-Pedax Twinmaster 12S A9312
54m bed, 10 beams, A20373 consists of:
9 Segments each 6.0m and 10 beams
The width of the bed is up to 2060mm and 450mm high. Weigth: each section approx. 1 ton, end section 1.5 tons. Overall approx: 11tons
Each bed fits on one truck easily.
TEE BEAM Molds
Combination Merten Mould and self-construction
Number of vibrators: 17 pcs. (Bosch company)
Control system: Yes
Traversing technology: hydraulic
Side formwork can be moved sideways to the right
Length max. 38 m
Max. width of upper chord 1012 mm
Mould: completely made of steel
Sloped I-shaped Beam Mould – 38m A9329
Fabricant: Ninive Casseforme, Italy
20 vibrators (Company Wacker)
Control system: Yes
Traversing technology: hydraulic
Side formwork left 150 mm laterally movable
Side formwork right 840 mm laterally movable
variable web height, 700 or 900 mm
Length of mould max. 63 m
Max. width of upper chord 400 mm
Concrete Girder Mould 63m A9328
Very smooth surface of the straightened wire bars
Use of wire coils, diameters 6 to 14mm
6 unwinding reels 6-14mm, alternatively 2×10 oder 12mm.
Production of straightened bars and
2 Bending units
Bar distribution conveyor
Chain conveyor with 100mm sections
Can be inspected during operation.
Hyperbolic Rotor-Straightener
Manufacturer: MEP SpA
Year: 2001
Condition: Refurbished
Auxiliary Mobile Straightening Device
Other: The machine is fully operative
-Single wire processing: Diameter Φ6mm-Φ16mm
-Double wire processing: diameter Φ6mm-Φ12mm
-4 pcs pay-offs and coil holders,
-automatic diameter change
-safety fences, 12m collection bench(in 3 parts)
-all pins and mandrels (for all diameters).
Stirrup Bender MEP Minisyntax A9309
Brand: SOMMER
Year 2007, less used
Casting area: 7215 x 3140mm
Max. element size: 7100 x 3000mm
Max. Load: 11tons
Double-Wall Thickness: 180-400mm
Steel sheet 8mm, even face
Used for face concrete
Including:
E-Vibration
Converter
Control
Turn-Over Tables for Double-Wall production
Complete casting bed equipment from PAUL for prestressing large precast concrete beams and girders
For main reinforcement and upper reinforcement.
Abutment anchor posts,
transverse anchor plates,
detensioning equipment,
vertically adjustable supports,
guards
safety devices
detensioning cylinders with support sleeves
Prestressing casting bed equipment PAUL A9332
Ø6 – Ø16
4 pay-offs 3 Ton
Flying shears
12mtr outlet
Bending heads with automatic mandrel change
Collection truck 12 mtr
Year 2006
Rotor straightening and bending machine A9337
Year: 2008
FULLY REFURBISHED
Working Hours: 17700
Two Pay-Offs and Two COIL Holders,
SAPIENS System
-Semi Automatic Diameter Change
-Single Strand dia: 6-14mm / #2 – #4
-Double Strand dia: 6-10mm / #2 – #3
-Max bending angle: 180°
-Central mandrels dia.: 20-70mm
-Max pulling speed: 150 m/min
-Max Bending speed: 1950°/sec
-Average electric power consumtion: 3kW
SCHNELL Formula Sapiens 2008
Girder height: min 70 mm max: 300 mm
Girder length: max 12000mm
Base width 40, 50, 60, 70, 80, 90, 100mm
Zigzag feed: 200mm
Wire diameter:
Top bar min: 5mm max: 12mm
Lower bar min: 4mm max: 12mm
Zigzag min: 3.5mm max: 6mm
Working speed max: 18m / min
Lattice Girder Welding Line
Hydraulic Tilting Table 8.6m x 3.4m
Condition: very good, face concrete possible
Sheet of 10mm Steel,
2 support legs with 2 Hydraulic cylinders,
Hydraulic station
Load capacity up to 750 kg/m2
Side form height 20/24cm
Electric Vibration system consisting of 6 electric vibrators
Power pack for vibrators with frequency converter
Hydraulic Tilting Table 8.6m x 3.4 m
included are:
1 pc transport cart with lifting device
1 pc energy supply with battery package
3 pcs transport frames with vertical shelfs on the head side
1 radio control for the transport table
25 tons Precast Walls Removal Truck
-year 2014
-with 2 pay-off,
-working hours 3.000, has only worked for a year
Technical specification:
-Single strand dia. : 6-16mm
-Double strand dia. : 6-13mm
-Max bending angle: 180°
-max Pulling speed 130 m/min
Stirrup Bender SCHNELL Prima A9313
1998
Condition: Very good (revised and repainted)
Minimum stirrup to work: 150 x 150 mm
Maximum stirrup to work: 1.500 x 1.500 mm
Ø of the stirrup wire: 6-16 mm
Normal Ø of the long. wire: 4 mm
Pulling speed: 45 m/min
Average energy consumption: 8 kWh
Standard version: 12m
SCHNELL-IDEA
Stema Pedax mod. Twinmaster 16
Year 2003
5 Decoilers
Till 12m, till diameter 16mm
Stirrup Bender STEMA
Brand: SOMMER
for the production of Manhole Bases DN 1000 T1 and T2
Inserting the channel is a subsequent process
Complete Hydraulic system was renewed in 2017/2018
Control: Siemens S7
The max. allover height of the manhole base is 90cm.
Control: MOELLER
Hydraulics: Serviced by Alpine Hydraulics
Manhole Base Production Machine A9331
Brand: NUSPL type Duplex
Very well-maintained condition!
Total length: 21m
Segment lengths 12m + 9m
Max. Production height: 1.200mm
Max. Production width: both sides 800mm each
Incl. central hydro pump unit
With built-on electrical control
Includes 14 pcs High frequency vibrators, BOSCH
Twin column mould
-Pulling,Measuring and Cutting Unit Mod. “CUT LINE”
-max diameter 40mm
-mobile stock for bars with 7 racks for the storage of the bundles of bars
-the maximum length of the bars that can be processed is 14m
-Pulling Unit
-Measuring Unit
-Cutting Unit: following capacitiy
1bar-dia40mm, 2bars-dia.32mm, 3bars-dia.26mm, 4bars-dia.20mm,
-Measuring and Evacuating line
-Distributing Conveyor
-Collecting Unit Rack and more
Rebar Cut Line MEP-OMES A9310
Brand: Longinotti
Year: 2006
Vacuum-Press Process
Slab size: 400mm x 400mm
Thickness: 19mm / 27mm
Ceramicslabs or light slabs for terraces
Shipping feature: Compact plant, easy to ship, Silos screwed, easy to set up, low construction height
Included are:
1. Blasting with dust collector
2. 4-Chamber Series dosage with beltscale
3. 3 Silos for binders, gray and white cement and stone flour
4. 250 Liter Mixer with scale for binders
1125 Circulating sheet pallets are included
Concrete Paving Slabs Press
Type: Automatic Stirrup Bender
Model: Formula 14 Sapiens
Manufacturer: SCHNELL
Year: 2009
Condition: EXCELLENT FULLY Operational Three breaked pay-offs and coil holders
Semi Automatic Diameter Change Single Strand dia: 6-14mm
Double Strand dia: 6-10mm
Stirrup Bender SCHNELL Formula 14 A9311
Stirrup Bender SCHNELL Prima 12R
Year: 2006
working hours: 24290
2 pay-offs
Single strand: 4,2-13 mm
Double strand: 4,2-10 mm
Max bending angle: 180°
Central mandrels: 20-50 mm
Max Pulling speed: 130 m / min
Max Bending speed: 1650° / sec
Average electric power consumtion: 2 kWh
Stirrup Bender SCHNELL 12R A9318
1 used MBK Wire cage welding machine
for round cages
completely overhauled in 2010!
with CPS control Siemens S7
for round reinforcement
For reinforcement cages with….
Cage Welding Machine A9326
1 used Rotor straightening and cutting machine
EVG/FIL RA-XE 10/3
Year of construction: 2008
Consists of:
– 3 pay-offs for steel coils 6, 8, 10 mm
– Straightening and cutting machine
– Spacer clip system
– Cross bar placing system
– Without spacer pots and feeding
Straightening machine for cross wire production of floor slabs EVG/FIL RA-XE 10/3 A9308
Completely reworked,
6 braked pay-offs,
pulling winch, MEP auto-diameter change, 12m run-off
VERY GOOD condition, year 1999, approx.
Single Strand Processing Wire Diameter Φ6mm-Φ16mm
Double Strand Processing Wire Diameter Φ6mm-Φ12mm
Square Stirrup Dimensions
Minimum with Φ6mm wire – #2wire (optional bending pin) 80mm x 80mm
Maximum if clockwise 1.500mm x 1.500mm
Maximum if counter clockwise 2.000mm x 2.000mm
Stirrup Bender MEP Mini Syntax
Monolithic Mould
Dimension: Length 4m x Width 2.50m x Height 3.20m
(Supportconstruction for cables Height 0.80m)
Wall thickness 10cm
External vibrators
Including Electric
Further Equipment:
1 pc Flat roof formwork
1 pc Gable roof formwork
Mould for Electrical Substation
Ø6-Ø12 double wire
Ø6-Ø16 single wire
8 pcs pay-offs, brakes
Output 140 m/min
Double bending device
Wire runoff table 12 m
Collecting cart
Automatic wire change
Automatic straightening
Fast Genius straightening system
Bridge Work Platform
Straightening System Service was done in Oct. 2018 by Schnell engineers
Stirrup-Straightening-Bending machine
Year 2009
Excellent condition, refurbished and revised
Only 3504 hours
Dimensions: 15,000 x 4,000 mm
Reinforcing cage dimension: Minimum 150 x 150 mm, maximum 1000 x 1000 x 8000 mmm
Stirrups diameter: 4-16 mm
Longitudinal wire: 4 to 6 mm
Minimum/Maximum pitch: 50-500 mm
Peak power absorbed: 35 kVA
Normal consumption: 5,5 kVA
Includes: 3 wire pay-offs
MEP Preform Cage Assembler
for Double-Wall production
Manufacturer: SCHWINGHAMMER
Steel covering even for faced concrete
Dimensions per table: 12,50 x 3,50m
Wall thicknesses: 20 – 40 cm
Incl. 2 x 8 pieces vibrators
Incl. hydraulic cylinders
Hydraulic 7.5 kW, 150 l. Tank, 200 bar
Heating pipes for water are installed
Technical specifications:
Usable length: 12.5 m
Usable width: 3.50 m
Height: approx. 1 m
Payload tilting table 750 kg / sqm
Payload Turn-Over Table 400 kg / sqm from 80 ° to 180 °
Tilt angle: approx. 80 ° or 180 °
Operating pressure: 180 bar
Electric connection hydraulics: 15 kW
Net weight: tilting table 11tons, folding table 13tons
Turn-Over Table
Payload 5 t
Weight 3.5 t
4 pcs. ABUS GM6 chain hoists
Filigree floor slab LIFTER
Brand/Type: EVG RA-XE 16 / 8-2
Year 2005
Specified for double wire / double feed
up to 16 mm (80% more power)
Included:
Run-off table 14 m, for double wire
Pay-offs electrical driven / braked CG 3000
8 pcs. Wire pay-offs, 3 to
Wire coil changing during production
2 pcs. shears for flying cut
Bar collection device 14m
Straightening line
with Rollover Bucket, 1125 Liter
2004, Power 7.5KW
Rails approx. 20m
Skip Conveyor DUDIK
7 braked pay-offs, 7 coil holders
pulling winch, MEP auto-diameter change, 12 m collection rack, safety fences
full set of spare parts,
opt to buy an automatic portable wire straightener,
accessory for producing circle stirrups
VERY GOOD condition although 2001 and very low operating hours
Single Strand Processing Wire Diameter Φ6mm-Φ16mm
fy=600N/mm2, ft=700N/mm2
Double Strand Processing Wire Diameter Φ6mm-Φ12mm
fy=600N/mm2, ft=700N/mm2
Square Stirrup Dimensions
Minimum with Φ6mm wire – #2wire (optional bending pin) 80mm x 80mm
Maximum if clockwise 1.500mm x 1.500mm
Maximum if counter clockwise 2.000mm x 2.000mm
Length of Straightened & Cut-to-Length Bars
Minimum 5mm
Maximum (with the existing support guide-collection bench/rack) 12.000mm
Stirrup Bender MEP Mini Syntax
Manufacturer – Mimmo Bendislik – Turkey
Year – 2014
Model / type – TKS – OTO-12
Total lenght – 12 meters
Tunnel profile – R 4.97m – 7.0m
Width of road – 7.56m
…and additional equipment
Motorway Tunnel Formwork System
Brands: WECKENMANN, VOLLERT, NUSPL, FILZMOSER, NETTER, UNITECHNIK, SAA
with 43 pcs moving steel moulds
Dimension of each mould: Length 16.30m, Width: 2.40m
Including:
Demoulding crane, Moulds stacking crane, Plotter and Double cleaning system, Shuttering-transport and cleaning, Oiling system, Concrete Distributor, Vibration: Gyroshake, Full Automatic Reinforcement Center FILZMOSER, Lattice girder preparation with Magnets-Handling, Steel straightening and cutting machine 5 Lines, Wire Diameters: 6 – 14mm for Longitudinal bars and cross bars with spacers and much more.
Carousel Line
Year: 2007
Condition: Very good
Minimum stirrup to work: 150 x 150 mm
Maximum stirrup to work: 1.500 x 1.500 mm
Ø of the stirrup wire: 6-16 mm
Normal Ø of the long. wire: 4 mm
Pulling speed: 45 m/min
Average energy consumption: 8 kWh
Cage-Assembler SCHNELL IDEA
Year: 2005
New Control Computer in 2017
Cutting capacity:
10 x 8, 8 x 10, 6 x 12, 5 x 14
4 x 20, 3 x 25, 2 x 32, 1 x 40
Max. advance speed 2,5 m/s
Drive technology: Electric servomotor
Bar Cutting Bench
Year: 2012
Condition: almost new, very good
CONTROL: IPC and E-cabinett
Moving area: max: 8500mm x 3600mm
Clear height: 2868mm
The plotter marks slabs cutting lines, rectangles and circles for openings and recesses, texts for identification on cast slab surface or places for dividers and fittings on empty bed surface.
Plotter AVERMANN