Straightening and cutting from wire coils
Max. Production speed: 160m/min
Wire diameter 8 – 20mm
6 wire diameters guided in parallel,
Automatic and immediate selection of wire diameter
Finished wire rod length: 500mm to 14000mm
Rotor straightening system with hyperbolic straightening rollers (no damage to the wire surface)
PROGRESS MSR 20
with Pull-In System
for bar diameters up to 40mm
Built in 2006
Model: HBSA-2.7H
Serial No: 304
Length 16.7m
Width 2.25m
Height 2.40m
Fully operational
VIDEO-LINK: https://youtu.be/LEzZFOrVP0k
BVM Rebar Shearline
4-lane rotor roller wire straightening machine
Type: MELC 18-4-CNC
Year of construction: 2006
Straightening system: Hyperbolic rotor rollers (gentle to the wire surface)
Wire diameter: 8, 10, 12, 16mm
Suitable for 5 tonnes coils
Parallel operation of several lanes possible
4 Flying Shears
VIDEO LINK youtube:
4-lane Straightening machine M25555
Rare machine that can make standard lattice girders and
shear force lattice girders (German Market).
Lattice girder welding line with variable feed 190 – 210mm
Type: GH400V-ST
V stands for: Adjustable stroke (feed) between 190 and 210mm,
ST stands for: Schubträger, Shearforce Lattice Girder
YEAR: 2009
Lattice girder height adjustable between 70 – 400mm
Minimum beam length: 0.8m
Max. Beam length: 16.0m
Basic width during production: 58mm (inside diagonal dimensions)
Finished beam width: 70 – 116mm (outer dimension of bottom chords)
Wire diameter Upper chord: 5 – 16mm
Lower chord: 5 – 16mm
Diagonale: 4.5 – 9mm
VIDEO-LINK:
FRONTSIDE-VIDEO: https://cloudlogin02.world4you.com/index.php/s/eZvgxj1nDPeyEoK
BACKSIDE-VIDEO: https://cloudlogin02.world4you.com/index.php/s/8Mrrzl4i3n0O3m1
EVG-FIL GH400V-ST
Latticegirder CUT-System for storing,
measuring, cutting, welding, distributing
Manufacturer: Progress
Year of construction: 2012
Lattice girder types: KT 800, lattice girder heights: 70mm – 360mm
Storage length: 14m
Measuring length max: 10m
Measuring length min: 0.8m
Cutting grid: 100mm
Lattice Girder Cut-System GTA-PROGRESS M24543
Pos.1 3-lane roller table
Complete with all electric drives
Year of manufacture: 2015
3 frequency inverters, one for each track
1 frequency inverter for the transverse mode
in the control box
Length 15m, width 2.50m
Pos.2 1-lane roller table
Complete with all electric drives
Relay controlled
L=14m, W=1m, H=1m
Weight: approx. 3 tonnes
Available immediately
Roller Conveyor 3-f
FIL-Betasystems straightening and Stirrups
Rotor straightening and cutting unit EVG-FILZMOSER RA-XE 16/5 with double bending device 2x16mm
year of construction 2004, with 2 movable bending heads at the outlet track
5 wire tracks for wire diameter: 6-16mm
production direction from right to left
CONDITION
In very good condition, regularly maintained.
AREA OF APPLICATION
In the precast concrete plant or in the steel shop.
Production of bars up to 12,5m length.
Production of bars with bent ends at the front and back.
RA-XE 16-5
Electric rotor directional drives
Year of manufacture 2001, well-maintained system! Little used.
-5 roller rotor devices with electric drive
-Wire quick-change device
-Production direction: from right to left
-Max. feed speed: up to 140 m/min
-5 electrically driven wire decoilers
-Protective fence in the area of the wire decoilers
-Wire run-out track for max. bar length 10m
-Beckhoff control: operable in manual and automatic mode
Sales Price: EUR 49.500,00
Rotor Straightener EVG/FIL RA-XE 14/5
Type: FILZMOSER GH300V
Lattice girder height adjustable between 70 – 300mm
Adjustable stroke (feed) between 190 and 210mm,
Wires: 5-14mm,
Welding transformers 250KVA
1 pc automatic girder run-off and stacking system, 12m
Remarks: machine is in full operation.
Can be inspected during daily production
Condition: Very well maintained
M21405-FIL-GH300V
Stirrup bender SCHNELL Barwiser, working from bars
Diameters:8, 10, 12, 16, 20, 22 mm
Year: 2004
Condition: Very good, perfectly working in our factory,
Accessories: Multi-compartment storage system revolving
Stirrup Bender
To find out the worth of your production machine/plant send some basic information like:
Send us an e-mail to info@precastplants.com or use the Request Form below:
How much can I get for my used machine ?
12 Moving Welding Heads
Year: 2019.
Condition: Very good
Mesh width: up to 4m, min. width: 500mm,
Length: up to 12m, min. length: 1m,
Max. bar length: 12m, min. bar length: 500mm,
Wire diameters: 6-16mm(#5),
Diameter changeover: fully automatic;
Line wire diameter: (5)-6-8-10-12-14-16mm,
Bar on bar welding: 16mm on 16mm,
Crosswire dia.: (5)-6-8-10-12-14-16mm
Wire preparation: the MMR 16 2×4 multiple rotor straightener and cutter
automatically prepares on two production lines the longitudinal and crosswires;
Progress M-System
Automatic double bending machine for bars up to Ø 50 mm (#14).
It works automatically and bends any kind of shapes, positive and negative bends included.
Roller conveyour length 12m
Year: 2006
– Automatic system for bars feeding and discharging
– Ejection cylinder: pneumatic ejector for shapes and mandrels to remove the tools from the toothed part
– Operation by means of digital electric servomotors
– 4 adjustable bending speeds
– inludes various bending mandrels
SCHNELL Robomaster
Powerful rotor straightening machine with
8 tracks (8 different diameters) and
2 flying shears
Manufacture of straightened bars up to 14m from the wire coil
Built in 2005
Wire diameter from 8mm to 16mm
Special technical features:
1. Fully automatic diameter change
2. Constant access to all diameters
3. 2 flying shears in parallel operation, guaranteeing high performance
Rotor straightening machine RA-XE 16-8-2
with Pull-In System
for bar diameters up to 40mm
Built in 2011
Length 16.7m
Width 2.25m
Height 2.40m
Fully operational
Available from January 2025
EVG-BVM rebar centre
Used EVG stirrup bending machine, type POLYBEND PBN-14-C,
for bending stirrups from coil or for producing straight bars from coil.
Year of manufacture 1999
Wire on coils can be used from 6 mm up to 14 mm.
Catalogue of stirrup bending shapes stored in the computer
– 2 decoiler
– Barcode scanner
– 4 bending mandrels
Still in operation.
EVG PBN 14C
Rebar Double Bender, Automatic double bending machine for bars up to Ø 50 mm (#14).
It works automatically and bends any kind of shapes, positive and negative bends included.
Roller conveyour length 14m
Year: 2010
– Automatic system for bars feeding and discharging
– Ejection cylinder: pneumatic ejector for shapes and mandrels to remove the tools from the toothed part
– Operation by means of digital electric servomotors
– 4 adjustable bending speeds
Robomaster Schnell
Rebar Double Bender, Automatic double bending machine for bars up to Ø 50 mm (#14).
It works automatically and bends any kind of shapes, positive and negative bends included.
Roller conveyour length 12m
Year: 2006
– Automatic system for bars feeding and discharging
– Ejection cylinder: pneumatic ejector for shapes and mandrels to remove the tools from the toothed part
– Operation by means of digital electric servomotors
– 4 adjustable bending speeds
SCHNELL Robomaster
Straightening and cutting line with DBE
Built in 2007, with 2 movable bending heads on the outfeed conveyor (DBE)
4 wire tracks for wire diameters: from 6-16mm
Production direction from left to right
CONDITION
In very good condition!, regularly maintained.
APPLICATION
In precast concrete plants or rebar shops.
Production of bars up to 12m in length
Production of bars with bent ends at the front and back
VIDEO Link Youtube
https://youtu.be/8tKAxdV1dfU
TECHNICAL DATA
Mains: 380V/50Hz
4 electrically driven wire decoilers for 3000kg coils 6-16mm
Fully automatic wire diameter change by moving the rotor table
4 wire lines, each with a hyperbolic rotor and an electric motor in use
Any diameter, length, bending shape and quantity can be selected
Bending device:
Servo-electric drives.
Bending legs up to 1.2m long
Ejection of the cut rods into 2 automatically folding collecting compartments and two further fixed compartments below
Flying shears for optimum production speed, does not interrupt the forward movement of the wire
EVG RA-XE 16/4
Bar Cut & Bend Centre
STEEL REINFORCEMENT, ROBOT, WIRES, FILIGREE GIRDERS
Automatic longitudinal and cross wire machine, diameter 6-14 mm, lattice girder preparation,
Automatic insertion robot for laying all bars, as well as the lattice girders (Filzmoser)
CONCRETE DISTRIBUTION, VIBRATION
Automatic concrete spreader 3m³, 9 ejection augers + 9 flaps, (Weckenmann/SAA company 2003,
control replaced 2019), electric vibrating station (Vollert)
CURING CHAMBER + AUTOMATIC PALLET STACKER CRANE (RBG)
47 pallet spaces divided, 47 insulated automatic segment doors (Vollert, extension 2003)
RBG (storage and retrieval machine, Vollert 1991)
for Double Wall (Twin Wall) and Filigree Floor Production, MFA M24514
Mesh cutter HAMBI
Year of manufacture: 2006
Make: HAMBI Gigant 6000
Working width: 6,20m
max. output:
12 mm ø single bar x
50 mm bar spacing
12 mm ø double bar x
100 mm bar spacing
M23500 Hambi mesh Cut
HAMBI Mesh bending machine
Type: MBH601V
Year: 2011
Working width: 6m
Drive power: 400V/50Hz, 7,5 KW
bar diameter: 6 – 12mm
Machine dimensions: 6700 x 800 x 1000mm
Weight: 1550kg
Hambi Mesh Bender
Manufacturer: Progress
Year of manufacture: 2009
Lattice girder types: KT 800,
lattice girder heights : 70mm – 360mm
Storage length: 14m
Measuring length max: 10m
Measuring length min: 0,8m
Cutting grid: 100mm
System Components:
Pos 1 Lattice girder top chord welding machine
Pos 2 Electrical equipment and control system
Pos 3 Communication programme
Pos 4 Lattice girder transport traverse
Pos 5 Lattice girder active storage
Pos 6 Lattice girder active storage system with automatic handling traverse
Pos 7 Vertical transport lattice girder
Pos 8 Automatically cross-travelling positioning carriage
Pos 9 Longitudinal positioning unit
Pos 10 Lattice girder cutting machine
Lattice Girder Cut & Weld
Type: VTA 360s round and oval
Manufacturer: PROGRESS
For making reinforcement cages of concrete pipes of 350-3600mm diameter in round as well as oval shape.
Number of longitudinal wires: max. 24
diameter of the cage: 350-3600mm
diameter of longitudinal wires: 6-10mm
diameter winding wire: 6-10mm
PIPE CAGE WELDING LINE
Type: EVG/FIL GH300,
Fully refurbished inYear 2019, built 1995
Lattice girder height adjustable between 70 – 300mm, 2,75″ – 11,8″
Upper bar: 5-14mm, #2 #3 #4
Diagonal: 5-7mm, #2
Lower bars: 5-14mm, #2 #3 #4
Base: 58, 70 and 80mm, 2.28″, 2.76″, 3.15″
Coils: up to 3 tons
Operating direction: from left to right
Power supply: 400 V, 50 Hz, 335kVA (2x150kVA)
Standard power at 50% switched on,
Power Hydraulic: 37 kW
FIL GH300
Type 450/22-190/12-3500
Year of manufacturing: 2000
Technical data:
– 12 distributors for longitudinal rebars.
– Diameter of the manufactured cages 220-1,920 mm
Condition: Very good, almost not used
MBK Cage welding machine
Output max.: 33 m/min
Lattice girder height: 80-300 mm (easily variable; precise motorized vertical regulation)
L.G. base (internal size) : 70-100 mm
Advance step: 400 mm
Lattice girder length: 2000-12000 mm (multiples of 100 mm)
DIAMETER OF THE WIRE:
Longitudinal wire Ø: 5-12 mm
Continuous stirrup (zigzag) Ø: 3.5-6 mm
(fy = 650 N/mm2 – ft = 650 N/mm2)
2009: Comprehensive update of the entire electrics/electronics
2014: Comprehensive update of the entire mechanic systems, repainting. Now it looks as if it was new!
Wire Girder Welding Line
Used EVG stirrup bending machine, type POLYBEND PBN-16-C,
for bending stirrups from coil or for producing straight bars from coil.
Year of manufacture 1999
Wire on coils can be used from 6 mm up to 16 mm.
Catalogue of stirrup bending shapes stored in the computer
– 2 decoiler
– Barcode scanner
– 4 bending mandrels
Still in operation.
Stirrup Bender EVG PBN-16C
Type MP 377-OVAL – AWDS-MODEM
34-300/29-3000/BSM-350
Year of manufacturing: 2008.
Technical data:
– 24 distributors for longitudinal rebars
– Diameter of the manufactured cage: from 340-3,000 mm
Condition: Very good, almost not used
MBK Cage Welder Oval
Year of Construction 2009
Consists of:
SVD/2 Coil Pay-off
RD 140/2 Mechanical Descaler
SA-CLR Soap Applicator
MTO 760 Cold Rolling Machine B
OM 1250 Spooler
Wire direction: from left to right
Process material: less carbon steel wire C = 0.10% max.
Input diameter: 16.0 to 5.5mm
Output diameter: 14.0 to 4.0mm, cold rolled ribbed concrete steel
Intake material load: up to 550 Mpa
Max. speed: 11.0 m/sec
Noise level: less than 82 dBA
Total weight approx. 29,800 kg
Total power: 555 kW
Cassettes: Four cassettes (two inbound and two finishing cassettes)
Cold Rolling Line GCR MTO
Year of construction 2009
Output: 110 Weldingcycles per minute (equal to 110 Transversal bars per minute)
Max. shape of the produced wire mesh: 2.40m x 7.80m
Long bars and transversal bars are fed by prepared bars
Straightening and Cutting of the bars is done by 2 EVG Cutting lines which work from coil
On demand there is a Cold Rolling Line with 2 blocks available which is suits to the capacity of the mesh welding line.
Mesh-Welding Line
Cage diameter 320-1600mm for precast concrete pipes
with sockets
Brand: HK-Technik
Production process: continuously
Length of cage: on demand
Line wire diameter: 6mm
Winding wire diameter: 5-8mm
Number of line wires: 12pcs
Rise of winding wire: 30-150mm
Wire cage welding machine
Consisting of:
– RA-X6 with 5 wire diameters 6, 8, 10, 12 und 14mm and bending functions on both ends for 45° and 90° bending ups. Brand: EVG-FILZMOSER
– Removal magazine wire bars for the robot, max. length 10m
– Removal magazine lattice girders for the robot
– REXROTH-HAUSER ROBOT for the pick and place of the reinforcement with 8 moving axis,
Range distance in X-axis: 14m and in Y-axis: 8m
Reinforcementcentre with ROBOT MFA EVG-FIL RA-X A20358
for the production of order-related mesh for precast concrete producers.
Type: FBE 33, year of construction 1995, fully in operation until Dec. 2021,
2016 New BECKHOFF control system installed (previously B&R).
Output: depending on diameter used: up to 1000 m2 per shift.
REINFORCEMENT MESH:
Mesh dimensions: Width up to 3m, length up to 11m
min/max mesh width: 500mm/ 3000mm
min/max/ mesh length: 1000mm/ 11000mm
FBE 33
Controlled by only one person.
Output: max. 4m per minute, but only ever run it at 2m per minute.
8 Rebar pay-off stations, with straighteners
The 5mm welded helical can be programmed to vary the leg frequency to provide closer centres at the pile ends and then transitioning to wider centres in the middle. There is a cutting station that moves automatically at the same speed as the cage and an automatic off load station that handles cages up to 15m long.
Pile Cage Welding Machine
A used EVG Stirrup bender, type POLYBEND PBN-16-C, used for bending stirrups from coil or produce straight bars from coil.
Wire on coils can be used from 6mm up to 16mm.
Catalog of stirrup bending shapes stored in computer.
– 2 wire pay-offs
– Barcode Scanner
– 4 bending mandrels
EVG Polybend PNB-16-C
Year 2005
Excellent condition, refurbished and revised
Dimensions: 15,000 x 4,000 mm
Reinforcing cage dimension: Minimum 150 x 150 mm, maximum 1000 x 1000 x 8000 mmm
Stirrups diameter: 4-16 mm
Longitudinal wire: 4 to 6 mm
Minimum/Maximum pitch: 50-500 mm
Peak power absorbed: 35 kVA
Normal consumption: 5,5 kVA
Includes: 3 wire pay-offs
MEP Preform Cage Assembler
Type: RA100/5
Automatic diameter adjustment
All diameters available at any time
– Control B&R
– 5 pcs. wire pay-offs, diameter 6-14mm
– hydraulic unit
– outfeed track: 10m length
– Double bending device for cranking up the ends
Straightening and cutting machine
Length: 1,215mm
Diameter: 482mm
Stroke: 250mm
Piston Area: 894.57cm2
Capacity: 5,367 kN
Weight: 600kg
Including hydraulic pump:
Specification R 11.2-11.2
-Operation pressure: 55(60) MPa
-Capacity: 11.2/22.4 l/min
-Weight: 615kg
Stressing Jack DSI Type HoZ 5400/250
Stirrup bender to produce stirrups and bars.
Year: 2007
Automatic setting of wire guides and straighteners.
Condition: very good, machine cleaned and all straightening and driving rollers changed to new ones!
Wire diameter ranges for single wire: 6,0 – 16,0 mm
Wire diameter ranges for double wire: 6,0 – 12,0 mm
EVG Polybend PBC 16mm A9321
FOR SALE
Rotor straightening and cutting machine EVG-FILZMOSER RA-XE 16/6 with double bending
Year of construction 1999, with 2 movable bending heads at the outfeed table
6 wire tracks for wire diameter: 6-16mm
Production direction from left to right
In very good condition, regularly serviced by EVG-FILZMOSER
EVG FIL RA-XE 16/6
for the production of mesh sheets and reinforcing panels. Top condition
Fully automatic, Year of manufacture: 2010
No changeover time needed for production of different sheet shapes
Including automatic bending stations for cross and line wire overhangs
Diameter of longitudinal bars of a mesh from coil (or rod): 6-16 mm (18-20 mm)
Diameter of transverse rods from coils: 6-16 mm
Length of the longitudinal bars of the mesh: 300-12000 mm
Length of transverse rods: 300-4000 mm
The largest element 4000 x 12000 mm
The smallest element 500 x 800 mm
The maximum weight of welded panels (meshes) is 700 kg
The maximum weight of a unit surface of welded elements is 30 kg/m2
EVG HFBE Custom made Mesh
appropriate for wire diameters 6mm up to 14/16mm
Double-Wire-Production from 6mm to 10mm
5 pieces wire pay-offs, with brakes and coil holders
Diameter change is semi-automatic with feeding rollers
Wire coils max. 3.5tons
Fully electric driven
Stirrup Bender PROGRESS EBAs 14/16 A20352
Reinforcement Center for Pallet circulation places Rebars and Lattice girders
This used complete steel processing plant made by PROGRESS
has revolutionized the production of Floor Slabs with FILIGRAN lattice girders.
consisting of a fully automatic wire straightener
Cutting and bending machine, an 8-axis gantry robot and a lattice girder processing station
(Was in use for pallets size 2.51 x 9 m)
Plant components in detail:
1. Full Auto Multi Wire straightening and bending machine
with spacer automatic, cut bar magazine and chain magazine.
Machine type: PROGRESS MSR 16/5 – 2Bk / e SERVO-ASH
– Incl. 2 bending heads (only cranking)
– Wire diameters: 6-14 mm
– Wire run-off length 11 m
2. Lattice girders processing station
PROGRESS GTA 91 / s – LIFT 93
Consisting of a lattice girder storage rack, a lattice girder cutting machine and a lattice girder
buffer and positioning magazine + top bar welding system
3. 7-axis linear robot PROGRESS EPR
For fully automatic laying of the transverse reinforcement, the longitudinal reinforcement and the lattice girders on the pallets
Control System Siemens S5
Steel Robot for Pick and Place
Year 1992
Girder height : 70 to 300 mm (steplessly)
Girder width : 65 to 85 mm
Top wire : 5 to 12 mm
Stirrups : 4 to 6 mm
Bottom wires : 5 to 12 mm
Girder length : 1 to 12 m
Power supply : 400 V / 50 Hz / 3 cycles / 150 KVA
Lattice Girder Machine
Rebar Cutting like NEW:
Year: 2015
Condition: like a new machine, was only used in test run.
The FLEXIPLUS is an automatic system for cutting to length of bar material. The machine is very flexible and allows the cutting of bars to length, the automatic collection of the positions in different compartments and bending of the bars at both ends.
Specification:
– bar thickness from 8mm to 40mm (#2 – #8)
– number of rods cut at once: 1 – 9 pieces, depending on diameter
– minimum/ Maximum cutting length: 800mm up to 12m
Rebar Cutting and Bending
Year 2012
380V/50Hz
Consists of body with welder, transformer, welding control unit and foot-switch.
Semi-manual operation
Type of lattice girder: KT 800
Girder height: 90-320mm
Max. diameter to weld: 12mm
THIS PRODUCT IS CATEGORIZED AS A BARGAIN AND ITS PRICE BELOW
EUR 10000
Lattice girder resistance welder PROGRESS
Fully refurbished
Year: 2000
Dismantled and ready for loading
2 pcs Wire Pay-Offs with brake,
2 pcs coil holder
All accessories
Double wire: 8-12mm
Stirrup Bender MEP FORMAT S A9350